12
English
Cleaning Recommendation
Modern sanitary tapware, kitchen mixers and showers consist of very di
fferent materials to comply with the needs of the
market with regard to design and functionality.
To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning.
Cleaning Materials for Mixers and Showers
Acids are necessary ingredients of cleaning materials for removing lime, however please pay attention to the following
points when cleaning mixers and showers:
• Only use cleaning material which is explicitly provided for this type of application, such as Hansgrohe’s Decalcifying Agent
(A), which is available through the specialist sanitary trade.
• Never use cleaning materials, which contain hydrochloric, formic or acetic acid, as they cause considerable damage.
• Phosphoric acid is also restricted as it can cause damage.
• Never mix any cleaning material with another.
• Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads or
Cleaning Instructions for Mixers and Showers
Please follow the cleaning material manufacturer’s instructions. In addition pay attention to the following points:
• Clean the mixers and showers as and when required
• The cleaning dosage and time the cleaner needs to take effect should be adjusted according to the product and the clea -
ner should not be left longer than necessary.
•
•
openings and gaps and cause damage.
• After cleaning rinse thoroughly with clean water to remove any cleaner residue.
Important
Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using.
If the surface is already damaged, the effect of cleaning materials will cause further damage.
Damage caused by improper treatment will not be covered by our guarantee.
Cleaning Instruction
Cleaning the hand and head
shower
With the manual cleaning
function “Rubit”, jet for-mer
calcinations can be removed
by simple rubbing.
Cleaning the handshower
Handshower
with
the
cleaning function against
calcinations. When the jet
types are changed, small
cleaning pins remove the
calcinations.
