10
r= 3m
5
6
max 5m
PREPARATION - ELECTRICAL POWER SUPPLY
CAUTION!
• Check the integrity of the grinder cable.
• Observe the voltage (V) and frequency (Hz) indicated on the grinder.
• To use an extension cord, use only an IP67 plug and socket (2P+T) and a 3 x 1.5 mm2 H07RN-F type
cable (max. length 5m).
• Check the position of the power supply cable: it must not interfere with manoeuvres and must not be
subjected to shocks or damage.
• Remove the electrical connection in any cases of maintenance or re-
placement of the diamond grinding wheel.
• Do not force the motor during processing.
• In the event of grinder malfunctions, contact an expert or our Technical Office.
CORRECT POSITIONING AND USE - SAFETY DEVICES
IMPORTANT:
always activate the vacuum
during use.
Summary of Contents for TOPROFILE
Page 14: ...14 ...
