b250v
- 17 -
void the warranty and relieve the Manufacturer from all liability in
merit.
The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be re-
turned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE AND USE
Steerage hoe b250v bears «CE» marking in compliance with
the European Union standards described in Directive 98/37/
EC and successive modifications, as indicated in the decla-
ration of conformity with which each machine is provided.
1.3.1 DESCRIPTION
The machine mainly comprises a metal framework with a central
linkage and three-point hitches (1 Fig. 1), and a bladed rotor situ-
ated in the lower part (11 Fig. 1) driven by a gearbox installed at
the side (7 Fig. 1).
The power required to operate the machine is transmitted by the
tractor via a driveline (with CE marking) which meshes with the
gearbox/final drive unit in a central position (5 Fig. 1), and is sub-
sequently transmitted to the gears by a drive shaft.
KEY to Fig. 1
A Front part
B Rear part
C Left side
D Right side
1 Three-point hitch linkage
2 Upper 3-point hitch
3 Machine lifting point
4 Driveline support
5 Gearbox
6 Levelling bar or plate adjuster ram
7 Side transmission unit
8 Safety guards
9 Levelling bar or plate
10 Hydraulic pipes
11 Bladed rotor
12 Lower 3-point hitch
13 Power take-off
14 Driveline shield
15 Skid adjuster bolt
16 Identification plate
17 “Flash” rotor
18 “Spikes” rotor
1.3.2 USE
Steerage hoe b250v has solely been designed for use in agri-
culture in order to work and break up the soil.
One single operator seated on the tractor is able to carry out
the various tillage operations.
Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or
property.
1.4 IDENTIFICATION
Each machine is provided with an identification plate (17 Fig. 1)
with the following data:
- Manufacturer’s name and address;
- «CE» marking;
- A) Machine model;
- B) Machine version;
- C) Serial number;
- D) Weight (in Kg);
- E) Year of manufacture.
The data on the identification plate of the machine should be cop-
ied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
- Operation and maintenance manual for the machine;
- «CE» declaration of conformity.
1.5 NOISE LEVEL
The sound level has been measured in compliance with
current standards, with the following results:
- Acoustic pressure LpAm (A) .......................... dB
83.6
- Acoustic power LwA (A) ................................. dB
98.5
1.6 TECHNICAL SPECIFICATIONS
Machine wid h
Tines
Kg/max
Model
HP
Kg
work. dimens. N°
Depth
(*)
MACHINE WITH BONNET
b250v 250 100-140 1160 250
275
60 10-20 2850
b250v 280 120-180 1380 280
305
66 10-20 2850
b250v 300 170-250 1320 300
325
72 10-20 2850
MACHINE WITH SPIKED ROLLER
b250v 250 100-140 1200 250
275
60 10-20 2850
b250v 280 120-180 1280 280
305
66 10-20 2850
b250v 300 170-250 1360 300
325
72 10-20 2850
MACHINE WITH CAGE ROLLER
b250v 250 100-140 1240 250
275
60 10-20 2850
b250v 280 120-180 1320 280
305
66 10-20 2850
b250v 300 170-250 1400 300
325
72 10-20 2850
MACHINE WITH PACKER ROLLER
b250v 250 100-150 1440 250
275
60 10-20 2850
b250v 280 120-200 1520 280
305
66 10-20 2850
b250v 300 140-250 1600 300
325
72 10-20 2850
(*) Maximum weight tolerated with accessory applications.
SECTION 2
General safety notes
2.1 SAFETY NOTES
The user must inform his personnel about the risks deriving from
accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations
established by the Directives and by the laws in force in the coun-
try where the machine is used.
It is therefore essential for operators to carefully read this manual,
particularly the safety notes, and to pay great attention to opera-
tions which could be particularly hazardous.
Summary of Contents for B250V
