- 16 -
b60pl
Damage deriving from negligence, carelessness, bad and im-
proper use of the machine or incorrect manoeuvres by the opera-
tor are also excluded from the warranty.
Removal of the safety devices with which the machine is equipped
shall automatically void the warranty and relieve the Manufac-
turer from all liability in merit.
The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be re-
turned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE AND USE
Steerage hoe b60pl bears «CE» marking in compliance
with the European Union standards described in Directive
98/37/EC and successive modifications, as indicated in the
declaration of conformity with which each machine is pro-
vided.
1.3.1 DESCRIPTION
The machine mainly consists of a metal framework housing the
central hitch with three-point linkage (1 Fig. 1) and a bladed rotor
installed in the lower part (11 Fig. 1) driven by a chain or gears
situated in the side housing (7 Fig. 1).
The power required to operate the machine is transmitted by the
tractor via a driveline (with CE marking) which meshes with the
gearbox/final drive unit in a central position (5 Fig. 1), and is sub-
sequently transmitted to the gears by a drive shaft.
KEY to Fig. 1
A Front part
B Rear part
C Left side
D Right side
1 Three-point hitch linkage
2 Upper 3-point hitch
3 Machine lifting point
4 Driveline support
5 Gearbox/final drive unit
6 Hood adjuster ram
7 Side transmission unit
8 Safety guards
9 Hood
10 Bearing stand
11 Bladed rotor
12 Lower 3-point hitch
13 Power take-off
14 Driveline shield
15 Work depth adjuster skid
16 Skid adjuster bolt
17 Identification plate
1.3.2 USE
Steerage hoe b60pl has solely been designed for use
in agriculture in order to work and break up the soil.
One single operator seated on the tractor is able to carry out
the various tillage operations.
Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or
property.
1.4 IDENTIFICATION
Each machine is provided with an identification plate (17 Fig. 1)
with the following data:
- Manufacturer’s name and address;
- «CE» marking;
- A) Machine model;
- B) Machine version;
- C) Serial number;
- D) Weight (in Kg);
- E) Year of manufacture.
The data on the identification plate of the machine should be cop-
ied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
- Operation and maintenance manual for the machine;
- «CE» declaration of conformity.
1.5 NOISE LEVEL
The sound level has been measured in compliance with
current standards, with the following results:
- Acoustic pressure LpAm (A) .......................... dB
83.6
- Acoustic power LwA (A) ................................. dB
98.5
1.6 TECHNICAL SPECIFICATIONS
b60pl
Machine width
Tines
Kg/max
Model
HP
Kg
work. dimens. N°
Depth
(*)
MACHINE WITH BONNET
b60pl 130
30-45
365 130
145
30 8-20
365
b60pl 155
35-50
395 155
170
36 8-20
395
b60pl 185
45-60
425 185
200
42 8-20
425
b60pl 205
55-70
450 205
220
48 8-20
450
MACHINE WITH SPIKED ROLLER
b60pl 130
30-45
440 130
145
30 8-20
440
b60pl 155
35-50
470 155
170
36 8-20
470
b60pl 185
45-60
510 185
200
42 8-20
510
b60pl 205
55-70
540 205
220
48 8-20
540
MACHINE WITH CAGE ROLLER
b60pl 130
30-45
450 130
145
30 8-20
450
b60pl 155
35-50
480 155
170
36 8-20
480
b60pl 185
45-60
520 185
200
42 8-20
520
b60pl 205
55-70
550 205
220
48 8-20
550
Summary of Contents for b60pl
