9
o
Operation
BEFORE FIRST USE
Before using your Breville air circulator for the
first time, remove all packaging material and
promotional labels.
OPERATING YOUR BREVILLE
AIR CIRCULATOR
1. Place the air circulator on a flat surface. Use
the Where to Position Your Air Circulator
section in this booklet for positioning
depending on requirements.
2. Insert the power plug into a 230V or 240V
power outlet and switch the outlet on. The
LED display will illuminate to display the
current room temperature. The air circulator
is now on standby mode.
3. Touch the
button to turn the air
circulator on. The air circulator will
automatically start on NORMAL mode
at fan speed 1.
n
NOTE:
To return to standby mode at any time during
operation, touch the
button.
w
CAUTION:
Never insert fingers, pencils or any other
objects through the guards whenever the
power plug is connected, in particular while the
air circulator is switched on.
n
NOTE:
The air circulator is fitted with a power saving
feature. The LED display will dim after 15
seconds if any of the operating buttons on the
control panel are not touched. The lights will
illuminate brighter once any of the operating
buttons on the control panel are touched.
n
NOTE:
To avoid infrared interference that may trigger
the operation of the air circulator, ensure the
air circulator is positioned away from other
infrared remote-controlled appliances.
ROOM AMBIENT TEMPERATURE
Your Breville Air Circulator is fitted with a
temperature sensor that detects the room
temperature and reports it through the LED
display. The figure displayed is only an
indication of the room temperature and will
vary depending on the location of the air
circulator in the room.
The LED display screen will cycle to show the
ambient temperature and the setting under
any selected mode.
LFA208_ANZ_IB_A20_FA.indd 9
28/5/20 5:29 pm
