6
7
FEATURES OF YOUR AIR PURIFIER
True HEPA filter
Your air purifier features a True HEPA filter
which removes up to 99.97% of airborne
dust and pollen as small as 0.3 microns
and helps reduce smoke, mould spores
and pet dander from the air passing
through the filter.
Pre-filter
The pre-filter captures large particles from
dust, hair, pet dander to help extend the
filter’s efficiency and life.
Activated carbon filter
Designed to reduce and neutralize odours,
vapours and gases from cooking, smoke,
chemicals, pets, and other unwanted
scents.
Light Protect UV light
Germs, viruses, bacteria, mold and fungi
trapped in the filter are exposed to UV light
to reduce re-production.*
*Results are based on the microbial
reduction rate of 99.9% with unit on the
high setting, UV light ON and Ionizer ON
for 2 hours. Tested at a third-party, Intertek
Microbiological Laboratory in the US.
Report #104730711COL-001.
Fabric filter
The vacuum-friendly outer fabric catches
larger particles, extending the life of the
main filter.
Ioniser
This appliance has an ioniser feature
which releases negative ions into outgoing
filtered air to help the air purification
process.
What are Ions?
Ions are tiny particles that carry a positive
or negative charge. They exist naturally
around us in the air, water, and ground.
Both positive and negative ions are
colourless, odourless, and completely
harmless.
How does the ioniser work?
Negative ions help air purification by
attaching themselves to very small
airborne particles in the room. These
particles take on a negative charge and
may join with positively charged particles
such as dust, pollen, smoke, and pet
dander to form larger particles. The larger
particles are then more easily captured by
the filter system.
Important notes:
Your ioniser may produce an occasional
popping or cracking sound. This is normal
and occurs when a small buildup of ions is
discharged.
After extended use, you may notice dust
around the grilles or panels.
•
This is caused by negative ions exiting
the air outlet, evidence of the ioniser’s
air cleaning effectiveness.
•
You can remove the dust with a soft
brush or clean, damp cloth. Larger
particles may be attracted to positively
charged surfaces throughout the
home, like walls or floors.
•
This may occur more frequently when
the filter is nearing the end of its useful
product life and unable to capture as
many charged particles.
•
Excessive amounts of pet dander,
dust, or smoke may decrease the life
expectancy of the filters and interfere
with the ionisation process.
PRODUCT SPECIFICATIONS
CADR
Smoke 191m
3
/h / 113 CFM
Dust 190m
3
/h / 112 CFM
Pollen 205m
3
/h / 121 CFM
Fan speeds
3
Noise level on
high speed
59 dB max
Power
consumption
38W
GETTING STARTED
Installing the True HEPA filter
1. Turn OFF and unplug the air purifier.
2. Locate the filter cover on the bottom of
the unit.
3. Rotate the knob counterclockwise to
remove the cover and expose the filter
(Figure 1-2).
4. Remove the plastic bag from the filter
and re-insert the filter (Figure 3).
5. Re-align the filter cover and turn the
knob clockwise to close.
6. Your unit is equipped with one 3-in1
True HEPA filter that lasts up to 12
month depending on usage.
OPERATING INSTRUCTIONS
1. Place the unit on a dry, stable, and firm
surface. Make sure not to block the top
air outlet vent and air intake grille.
2. Connect the power adaptor to the
power jack located on the rear base of
the unit. Plug the power adaptor into
the supply socket.
Note:
The display
lights will initially flash on and then turn
off. The power button will remain
illuminated when the unit is plugged in.
3. Tap the power button to turn the unit
ON.
4. When starting up, the appliance will
operate in fan speed 3 by default.
5. To select a desired fan speed, tap the
fan button to cycle through the
speeds 1 (low), 2 and 3 (high) until the
desired speed setting is illuminated.
6. To set the timer for 4, 8 or 12 hours,
tap the timer button until the desired
setting is illuminated. When the set
time has elapsed, the appliance will
automatically switch off. To deactivate
the timer, tap the timer button
repeatedly until the timer setting lights
are turned off.
7. To turn the ioniser ON, press the
button once until the white LED light
next to the button is illuminated. Press
the
button again to turn the ioniser
OFF.
8. To turn UV ON, press the button
once until the white LED light next to
the button is illuminated. Press the
button again to turn the UV OFF.
9. To turn night mode ON, tap the
button once. The button will
illuminate and turn the display lights
off. Tap the button again to turn
night mode OFF.
Note:
Night mode
will maintain your previous fan speed
setting.
10. To turn the night light ON, press the
button. To turn the night light OFF,
press the button once more.
11.
Important:
Always turn OFF and
unplug the unit when not in use.
CARE AND MAINTENANCE
•
Before cleaning the air purifier, always
turn OFF and unplug the unit.
•
Clean the exterior surface with a clean,
damp cloth.
•
The top air outlet vent can be cleaned
of dust with a small, soft brush.
•
If you would like to clean the inside of
your filter compartment, ONLY use a
dry, soft cloth to wipe it down.
WARNING:
Do not allow moisture to come
into contact with the main housing of the
air purifier. NEVER use detergents, glass
cleaner, furniture polish, paint thinner, or
other household solvents to clean any part
of the appliance.
Figure 1 Figure 2 Figure 3
BAP007_21EM3 (UK).indd 6-7
BAP007_21EM3 (UK).indd 6-7
2021/11/22 上午9:42
2021/11/22 上午9:42