Breville BCS600XL, Manual

Operating your Breville Cordless Hand Blender 

7

Before first use

Remove any packaging material and promotional
labels. Remove the blending shaft from the blister
pack and wash the blending shaft in warm soapy
water. Rinse and dry thoroughly. Ensure no water
remains inside the blending shaft to avoid water
ingressing into the motor body when re-attached.

Disassemble mixing jug, storage lid and smoothie
attachment and wash in warm soapy water, rinse and
dry thoroughly. Ensure no water remains inside the
smoothie attachment to avoid water ingressing into
the motor body when re-attached.

Dishwashing is not recommended for any part of the
Breville Cordless Hand Blender.

Unlike stick blenders which are plugged into the
power outlet for operation, the Cordless Hand Blender
is safe for use in and around the sink and stove.
However, care should be taken not to immerse the
motor body in water or any other liquid. If using the
Cordless Hand Blender as a stick blender to blend hot
food in a saucepan, remove the saucepan from the
heat source and ensure the liquid is not boiling.
Allow hot food to cool slightly before blending. The 
Cordless Hand Blender should be kept away from 
any heat source.

The charging base is running at a safe, low 
voltage, but it will be damaged if immersed in 
water. The charging base should always be
positioned in a clean, dry place well away from 
water or other liquids.

Charging the battery before first use:

The battery in the motor body of the Cordless Hand
Blender is shipped either completely discharged of
power or with a small amount of charge. The battery
will require approximately 5 hours to fully recharge
from completely flat. The battery will require at least
2 hours recharging before it can be used effectively.
Subsequent recharging should take a shorter period
of time depending on the length of time the charging
base has been switched off.

The Cordless Hand Blender motor body has been
designed to be placed on the charging base and left
on charge at all times when not in use. The Cordless
Hand Blender motor body is fitted with a special
protective electronic circuit to prevent overcharging.
Unlike other rechargeable battery technologies, your
high quality Nickel Metal Hydride (Ni-MH) cells have a
high capacity and long life. They do not need to be
completely discharged before recharging.

All rechargeable batteries lose storage capacity 
over time. If the Cordless Hand Blender battery
appears to deteriorate so that the operation time is
diminished, return the unit to a Breville Service
Center for battery replacement.

Know your Breville Cordless Hand Blender

6

Long lasting 12V battery

2 speed push button control

light press for low speed, firm press for high speed

Safety system 

ensures the Cordless Hand Blender will not operate unless the Power 

button and Speed button are pressed simultaneously

Portable cordless operation

Detachable shaft for easy cleaning

Stainless steel ice-crushing blades

34 floz (1 liter) capacity mixing jug with storage lid

ideal for blending, measuring and storing a variety

of foods. The jug lid also doubles as a non-slip

base, as it fits both the top and bottom of the jug.

Patented smoothie attachment 

for whipping and aerating

360° charging base 

with cord storage

Optional wall 

mount included

THE CORDLESS HAND BLENDER IS A VERSATILE APPLIANCE

THE CORDLESS HAND BLENDER MOTOR BODY CAN BE ATTACHED TO:
• THE STAINLESS STEEL BLENDING SHAFT – FOR USE AS A STICK BLENDER
• THE SMOOTHIE ATTACHMENT – FOR USE AS A STICK MIXER
• THE CHOPPER BOWL WITH CHOPPING BLADE AND LID - FOR USE AS A MINI CHOPPER 

OR FOOD PROCESSOR.

Charge light

indicates when the Cordless

Hand Blender is charging

(red) or fully charged

(green)

Chopping bowl

for use as a mini chopper or food processor.

Item not shown.

BR8252 BCS600XL_Book_FRE_SPN  13/12/06  4:28 PM  Page 6