22
PROBLEM
EASY SOLUTION
The motor does
not start
•
There is a safety interlock switch to prevent the motor from starting if it is not
properly assembled. Make sure the processing bowl and lid are securely locked
into position.
•
If you are slicing or shredding and the above solution does not work, make sure
that the food contents in the feed chute are cut below the maximum fill line so
that the activation rod can engage the motor.
•
Make sure the large food pusher is inserted in the feed chute low enough to
engage safety interlock switch.
•
If the motor still will not start, check the power cord and power outlet.
The food processor
shuts off during
operation
•
The lid may have become unlocked; check to make sure it is securely in position.
•
If the motor overloads, all buttons will flash in unison.
Unplug at the wall, and allow the food processor to cool for 20–30 minutes
before resuming.
The food processor
vibrates/moves
during processing
•
Make sure the rubber feet at the bottom of the unit are clean and dry.
Also make sure that the maximum load capacity is not being exceeded.
•
This is normal as some heavier loads may require the motor to work harder.
BLENDER
PROBLEM
EASY SOLUTION
Motor doesn’t start or
blade doesn’t rotate
•
Check that the power plug is properly inserted into the power outlet.
•
Motor Overload Protection may have operated (see below).
Food is unevenly
chopped
•
This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
•
The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
Food is chopped too
fine or is watery
•
Try blending for shorter period of time. Use PULSE for better control.
Food sticks to
blade and jug
•
The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending.
Blender overloaded
•
This blender has overload protection to prevent damage to the motor.
Unplug and allow the blender to cool down for 15 minutes. Once cooled,
you will be able to use the blender as usual again.
•
We recommend blending in smaller batches, or cutting ingredients into
smaller batches.
Summary of Contents for BFP560
Page 1: ...the Kitchen Wizz 8 Instruction Book BFP580 BFP560...
Page 6: ...6 Components A B C D E I J K H F G...
Page 9: ...9...
Page 23: ...23...
