8
Operating Your Breville Variable Temperature Kettle
Before first use
Remove and safely discard any packaging material
or promotional labels attached to your kettle. It is
recommended that before first use to fill the kettle to
the maximum level with cold tap water, bring to the boil
by selecting the SET TEMP button to Boil and press the
START/CANCEL button, then discard the water. Your kettle
will only operate when positioned on the power base. The
kettle will automatically switch off when the water has
reached the selected temperature.
Operation of your kettle
To fill the kettle, remove the kettle from the power base
and open the lid by lifting up the lid. Fill with the desired
amount of water.
Ensure the lid is closed and locked firmly into place.
Position the kettle securely onto the power base. Insert the
power plug into a 230/240 power outlet and switch on.
Press START/CANCEL button to start boiling or select
desired water temperature by pressing the illuminated
SET TEMP button. Toggle between 5 pre set temperatures;
80°, 85°, 90°, 95° and Boil. Press the START/CANCEL
button for water to boil up to selected temperature. The
Kettle water window will illuminate in blue.
When the kettle has heated the water to the selected
temperature, 1 beep will sound and the START/CANCEL
button surround illumination will switch off.
If the KEEP WARM function has been selected, the KEEP
WARM button surround will remain illuminated in red
and the kettle will remain at pre-set temperature for 20
minutes.
If KEEP WARM function has not been selected, water
temperature will remain at preset temperature for 1
minute then reset.
If further heating of the kettle is not required, switch off
at the power outlet, unplug the power cord and empty the
water from the kettle. Replace the kettle onto the power
base and close the lid.
NOTE
Always fill the kettle between the minimum (500) and
maximum (MAX 1500) marks on the water window.
Too little water will result in the kettle switching off
before the water has boiled or reached the selected
temperature. Filling above the maximum mark
(MAX) may result in boiling water splashing from
the kettle.
NOTE
The LED display will display
if under 40°C. If
the water temperature is above 40°C the display will
show actual water temperature in kettle.
Once the START/CANCEL button is pressed the LED
display will show
if under 40°C. If the water
temperature is above 40°C the display will show
actual water temperature in kettle.
NOTE
Note: Do not remove the kettle from the power base
during operation. Ensure the kettle has switched
off after the water has boiled or the selected
temperature has been reached before removing the
kettle from the power base.
If the kettle is removed from the power base all
selected functions will be reset, including KEEP
WARM function.
NOTE
When the preset ‘boil’ temperature is set the water
temperature reaches 100°C but will drop to 95°C if
the KEEP WARM function has been selected.
NOTE
Sleep Mode:
If no other function has been selected within 30
minutes, then all displays and button lights will
automatically go into sleep mode.
BKE520_IB_FA.indd 8
5/5/09 10:19:21 AM
