background image

11

ASSEMBLy & OPERATION 

BEFORE FIRST USE

Remove any packaging material and 

promotional labels. Remove the blending 

leg from the mixer motor body and wash 

it in warm soapy water (refer to assembly 

instructions in this booklet). Rinse and dry 

thoroughly. Ensure no water remains inside 

the blending leg to avoid water running into 

the motor body when reattached.
Disassemble and wash the chopping blade, 

chopper bowl, chopper bowl lid, whisk, 

storage lid, and blending jug in warm soapy 

water, rinse and dry thoroughly. Ensure no 

water remains on the chopper bowl lid or 

whisk attachment to avoid water running 

into the motor body when reattached.

NOTE

The detachable blending leg, 

chopping bowl (without the gearbox), 

quad blade, variable masher, whisk 

can also be washed in the dishwasher. 

The whisk gear box, processor gear 

box, masher gear box and motor  

body are not dishwasher safe – see 

the care and cleaning section of this 

booklet for cleaning instructions of 

these parts.

This stick mixer is a versatile appliance 

that can be attached to:

• 

The stainless steel blending leg – for use 

as a stick mixer.

• 

The food processor bowl with quad 

blade, variable slicing disc, reversible 

shredding disc - for use as a mini  

food processor.

• 

The variable mashing leg – for use as 

mashing vegetables.

• 

The whisk attachment – for use as a 

hand whisk.

TO ATTACH THE BLENdING LEG

Hold the blending leg with the blades down, 

and align the top end of the blending leg 

with the corresponding end of the motor 

body and push until the blending leg clicks 

and locks onto the motor body. 
Always ensure blending leg is dry, and no 

water left inside, before reattaching.

USING AS A STICK MIxER

Ensure the blending leg is assembled to the 

motor body as detailed above.

1. 

Place food to be processed into a 

sufficiently large mixing bowl or 

saucepan (do not use the food processor 

bowl as this may damage either the stick 

mixer or the bowl). The bowl should only 

be ½ full or less when blending liquids  

or when making a puree of fruit  

and/or vegetables.

2. 

Insert the plug into a 230/240V power 

outlet and turn the power on.

3. 

Turn the dial at the top of motor body, 

select a speed from 1 to 15. 

NOTE

If selecting a higher speed, it is 

recommended that you start on  

a slow speed and then increase to  

high speed to avoid splattering and 

over-processing.

Summary of Contents for BSB530

































Reviews: