Breville BSB530, Instruction Booklet

12

ASSEMBLy & OPERATION 

4. 

P

lace the blending leg as deeply as 

possible into the bowl and press the 

trigger switch to turn the stick mixer on. 

The button must be held for the required 

duration of operation.

5. 

Work through the ingredients in  

the bowl with a gentle raising and 

lowering motion.

6. 

Switch off the motor by releasing the 

trigger switch.

7. 

Ensure the motor has completely 

stopped before lifting the blender out of 

the bowl.

8. 

When processing has finished, switch 

off at the power outlet and remove the 

power plug.

TO dETACH THE BLENdING LEG

Ensure the trigger switch is released, the 

power is turned off at power point and the 

appliance is unplugged. Hold the motor 

body with one hand, and using thumb and 

finger of the other hand, press on the two 

EJECT buttons on either side of the motor 

body. Pull the motor body away from the 

blending leg to detach.

RECOMMENdATIONS WHEN USING 

AS A STICK MIxER

• 

The stick mixer blends foods and 

liquids rapidly, therefore it is easy to 

over process. Remember when using the 

blending leg to stop the stick mixer and 

check food throughout the operation.

• 

Use caution when blending hot food as it 

can splatter.

• 

The stainless steel blending leg allows 

for hot food to be processed directly 

in the saucepan. This makes blending 

soups and sauces very easy.

• 

For safety reasons remove saucepan 

away from the heat before processing.

• 

Ensure the body of the appliance and 

power cord are kept away from any  

heat source.

• 

When pureeing and blending, cut food 

into uniform sizes. This will ensure 

smooth and consistent results.

• 

Warm all liquids to be added to soups 

and purees, this will ensure even 

blending.

• 

Do not operate the appliance 

continuously for more than 1 minute. 

Allow the motor to rest for 1 minute 

between each use. 

If food becomes lodged around the 

processing blade or in the blade guard, 

follow the safety instructions below:

1. 

Release the trigger switch, the power off 

at the power outlet and unplug the cord.

2. 

Use a spatula to carefully dislodge the 

food. Do not use fingers as the blades 

are sharp.

3. 

After the food has been removed and 

blades are clear, plug the appliance back 

into the power supply, switch the power 

on and continue blending.