16
ASSEMBLy & OPERATION
5.
When processing has finished switch
off the motor by releasing the trigger
switch, switch off at the power outlet and
remove the power plug.
6.
Detach the food processing bowl and lid
(refer to instructions). Remove the lid
from the food processor bowl. Carefully
remove the food processing blades
or quad blade and use a spatula to
scrape off any attached food back into
food processing bowl.
TO dETACH THE FOOd
PROCESSING BOWL ANd LId
Ensure the switch is released, power is
turned off at power point and the appliance
is unplugged.
Hold the motor body with one hand and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the chopper bowl lid to detach.
TO USE THE FOOd PROCESSOR
For food preparation tips and recipes refer to
the recipe section of this booklet.
1.
Insert the plug into a 230/240V power
outlet and turn the power on.
2.
Select a speed between 1–15 on the
speed control dial.
3.
Press the trigger switch to turn
the appliance on and start the
processing action.
4.
Feed the food through the feed chute
of the food processor, using the food
pusher to push it down.
CAUTION
Only use the small pusher with
the large pusher resting inside the
feed chute.
Summary of Contents for BSB530
