11
white and the Led toasting progress indicator
(above the selected browning setting) will flash
and start to gradually count down (towards the
left) indicating the toasting progress.
. the LIFt & LooK™ button can be pressed
up until 10 seconds before the end of the
toasting cycle to view the browning of the
bread. When selected, the LIFt & LooK™
button surround will flash and the Led toasting
progress indicator will remain steady (indicating
that the selected browning setting has not
been interrupted by the carriage rising). the
toasting recommences immediately as the
carriage lowers and locks into position, and
as indicated by the LIFt & LooK™ button
surround illuminating and the Led toasting
progress indicator flashing.
. Approximately 10 seconds before the end
of the selected browning setting, the LIFt
& LooK™ button will cease illumination.
As the toasting stops and the carriage rises,
the toASt/CAnCeL button surround will
flash and the Led toasting progress indicator
will cease flashing. the Led toasting progress
indicator will re-illuminate to the previously
selected browning setting.
NOTE: ThE TOaSTEr wIll rE-acTIvaTE
frOm STaNd-By mOdE aNd
ThE TOaST/caNcEl BuTTON
SurrOuNd aNd lEd TOaSTINg
prOgrESS INdIcaTOr wIll
IllumINaTE whEN:
a. aNy Of ThE BuTTONS arE
prESSEd.
B. ThE BrOwNINg cONTrOl
SlIdE IS mOvEd.
c. ThE pOwEr aT ThE pOwEr.
OuTlET IS TurNEd Off
ThEN ON agaIN.
WaRNiNg: dO NOT LEaVE THE TOasTER uNaTTENdEd WHEN iN usE as TOasT
MaY JaM.
iN THE uNLiKELY EVENT THaT bREad, CRuMPETs OR MuFFiNs bECOME
JaMMEd iN THE TOasTiNg sLOTs, aLL THE buTTONs aNd THE LEd
TOasTiNg PROgREss iNdiCaTOR WiLL FLasH aNd THE ELEMENTs WiLL
TuRN OFF. sWiTCH THE TOasTER OFF aT THE POWER OuTLET, REMOVE
THE POWER PLug aNd aLLOW THE TOasTER TO COOL COMPLETELY
bEFORE CaREFuLLY EasiNg THE bREad OuT OF THE sLOTs. TaKE
CaRE NOT TO daMagE THE ELEMENTs.
OPERaTiNg YOuR bREViLLE PROFEssiONaL 800 COLLECTiON™ TOasTER
oPeRAtInG YouR BRevILLe PRoFeSSIonAL 800 CoLLeCtIon™ toASteR
NOTE: ThE TOaSTEr wIll rEvErT
TO STaNd-By mOdE afTEr 30
SEcONdS If a BuTTON IS NOT
prESSEd Or ThE SlIdE IS NOT
adjuSTEd. ThE TOaST/caNcEl
BuTTON SurrOuNd aNd lEd
TOaSTINg prOgrESS INdIcaTOr
wIll cEaSE IllumINaTION.
. once the toasting cycle has completed and
the carriage has risen and locked into the
raised position, the toast ready alert will sound.
Remove the toast. the toASt/CAnCeL button
surround will re-illuminate in white for up to
0 seconds, ready for the next toasting cycle.
Summary of Contents for BTA820
