Breville BTM800, Instruction Booklet

24

NOTE:  

Once a customised time has been 

selected and one tea making or 

water heating cycle has been 

activated, the customised time will 

remain in the memory of the Tea 

Maker until you change it. To return 

to default settings, see Page 33.

AUTO START FEATURE

This feature allows you to program the 

specific time when the Tea Maker will 

automatically turn on and start either a tea 

brewing cycle or water heating cycle.  

Setting the ‘Auto Start’ Feature

1. 

Press and hold the AUTO START 

button for 2 seconds. The button 

surround will illuminate and the tea alert 

will sound.

2. 

The LCd screen will display the   AUTO 

START clock symbol and a blinking 

CURReNT TIMe and START TIMe.

3. 

To set the CURReNT TIMe, press the 

left   ARROW UP button to increase 

the time, or the left   ARROW dOWN 

button to decrease the time in 1 minute 

increments. ensure the correct 'AM' or 

'PM' is displayed.

NOTE:  

Pressing and holding the  

 ARROw UP button or

 ARROw dOwN button will 

increase the scrolling speed.

4. 

To set the START TIMe, press the right       

 ARROW UP button to increase the 

time, or the right   ARROW dOWN 

button to decrease the time in 1 minute  

increments. ensure the correct 'AM' or 

'PM' is displayed.

i)  Press the right   ARROW UP 

button to increase the time up to the 

maximum 10 minutes.

ii) Continue to press the right 

   ARROW UP button. The LCd 

screen will display 'MANUAL LIFT' 

and ‘- - : - -‘ on the right side of  

the LCd.

iii) Once the Tea Maker is activated  

and the correct water temperature  

is reached, the Basket will 

automatically lower. 

iv) In the manual lift mode, the LCd 

screen will automatically commence 

the 'Brew Time' feature. This feature 

counts up to a maximum of 60 

minutes, allowing you to monitor 

how long the Basket has been 

submerged.

v) Once the desired brew time has 

elapsed, press and hold the BASkeT 

button for 2 seconds. The Basket  

will rise.

vi) Once the brewing is complete, the 

LCd screen will automatically display 

the ‘Time Since Brew’ function. This 

function counts up to a maximum of 

60 minutes, allowing you to monitor 

the freshness of your brew. It does 

not activate the heating elements.

AUTO START