15
4. Select ‘Save’ to save your desired preset.
The saved preset will appear onto the ‘My
Presets’ menu, where you will be able to use,
edit or delete them.
SETTINGS
The settings mode allows you to configure
different parameters for the immersion
circulator, as:
1. Data Logging (setting available for CSV750
model only): For more information about
the Data Logging setting, refer to page 12.
2. Probe Calibration (setting available for
CSV750 model only) The probe comes
calibrated from factory, however to ensure
that the probe’s accuracy does not drift over
time please calibrate yearly. The guided
calibration cycle can take up to 30 minutes
and will allow you to add a yearly reminder.
3. Date & Time configuration.
4. Sound & Display configuration.
5. Temperature & Measurement Units
configuration.
6. Help section: the help section will give you
more information about using the probe;
cleaning the appliance and changing the
flow direction.
7. Language configuration.
8. Factory reset.
LOSS OF POWER
In the event that electrical power is disrupted
during use, your immersion circulator will begin
operating automatically when power is restored.
The unit will display the time when power was
lost, the amount of time there was no power and
the temperature at which the unit resumed back
to the set temperature (for the CSV700 model,
the unit will only display the temperature). Use
this information to determine if the item being
cooked is safe, if you are uncertain at all we
recommend that you discard the cooked food.
