Breville Easy Air LAP158, Instruction Book

10

TIMER  

• 

The air purifier can be set to operate for 

timed intervals of 2 hours, 4 hours and 8 

hours, stopping automatically when the 

selected operating time has elapsed. 

• 

If no timer is set, the air purifier will 

continuously operate until the unit is 

manually switched off. 

• 

Press the   TIMER button repeatedly until 

the desired interval hours are illuminated on 

the control panel. 

• 

For continuous operation, press the    

TIMER button repeatedly until there are no 

lights illuminated under the timer intervals.

FILTER RESET

• 

The filter reset light will illuminate red 

indicating that the filter needs to be replaced.

• 

Replace the filter according to the directions  

found under Replacing the Filter in this book. 

• 

Once the filter is replaced, press and hold the 

 POWER button for 5 seconds to reset the 

Filter Reset light. 

• 

The built-in timer for the filter reset is 4,320 

operating hours.

• 

If the Wi-Fi is connected, while the reset filter 

light is reset, the Wi-Fi will need to be  

re-activated. Press and hold the   POWER 

button until the light illuminates on the  

Wi-Fi icon.

NOTE

For best performance, the filter should be  

cleaned at least monthly as per the instructions 

found in the Care, Cleaning & Storage section  

of this book.

Wi-Fi  
Connectivity

The Breville Easy Air

TM

 Connect Purifier can 

offer remote operation by using a home Wi-Fi 

connection and the Breville Home Connect™ 

app downloaded to a compatible mobile phone 

through the Google Play store or Apple App 

store. 
To go straight to the appropriate app store, 

scan the QR code below.

For instructions on how to use the app, scan the 

QR code below, refer to the Quick Start Guide 

that can be found in the box or go to  

tinyurl.com/HomeConnectQuickStart.

NOTE

The Breville Home Connect™ app is 

compatible with mobile phones running 

Android

®

 5.0 or later and iOS devices 9.0  

or later.

NOTE

To control the purifier using the app, the 

purifier must be plugged into an active power 

outlet and switched on at the power outlet. 

If the purifier is turned OFF or disconnected 

from the power outlet, then the app cannot 

connect to the purifier via the network.