Breville Easy Air LAP158, Instruction Book

11

CONNECT YOUR PURIFIER TO WI-FI

1.  Ensure the mobile device is connected to a 

home Wi-Fi network.

2.  To set up the purifier, turn it on at the power 

outlet. The purifier must be turned on via 

the control panel. Press and hold the   

button for 5 seconds until the   symbol 

light is flashing rapidly. The purifier is now 

ready to connect.

3.  Log into your Breville Home Connect™ 

app account and stay on the “Home” page. 

To add the purifier to the list, touch ‘Add 

Device’ or the   symbol found in the top 

right-hand corner of the screen. Follow the 

prompts in the app. 

4.  If the connection is successful, the purifier 

will appear in the main page of the app 

and the   symbol light on the purifier will 

illuminate.

Care, Cleaning  
& Storage

The air purifier and filter should be cleaned at 

least once every month. Ensure the air purifier  

is switched off and disconnected from the 

power outlet and allow all parts to cool before 

cleaning or storing.

• 

Use a clean, dry cloth to clean all external 

surfaces of the air purifier.

NOTE

More frequent cleaning may be required 

depending on environmental conditions.

BREVILLE RECOMMENDS

• 

Always ensure the air purifier is turned 

off, switched off at the power outlet and 

unplugged and allow the unit to cool 

before performing any cleaning or filter 

replacement.

8

DO NOT

 stick any foreign objects or your 

fingers inside the air inlet/outlet of this unit.

8

DO NOT

 use gasoline, benzine, thinner, 

harsh cleaners, etc. on and/or in the unit 

while cleaning as they will damage the unit.

8

NEVER

 use alcohol or other solvents  

on this unit.

FILTER CLEANING AND REPLACING

WARNING

The filter is not washable. Do not immerse any 

part of the air purifier in water as it will cause 

damage.

• 

The Pre-filter should be cleaned at least once 

every month using a vacuum cleaner. Gently 

vacuum using a hand-tool attachment such 

as a brush or upholstery tool. Clean more 

often if required.

• 

Do not use any solutions, hard bristle  

brushes or sharp objects to clean as this  

can cause damage.

• 

Replace the filter as indicated using the 

instructions following.