8
CARE AND CLEANING
9
OPERATING YOUR BREVILLE WOK cont’d
Do not immerse the cord,
plug or temperature
control probe in water or
any other liquid.
For convenient storage of
the Control Probe, line the
wok bowl with two sheets of
kitchen paper and place the
probe on the kitchen paper.
This will ensure the probe
and plug doesn’t scratch the
non-stick coating
THE AVANCE GOURMET WOK GETS VERY HOT DURING USE, ALLOW THE
UNIT TO COOL BEFORE MOVING OR STORING.
NEVER PLACE OIL OR FOOD INTO A COLD WOK WHILE IT IS HEATING,
THIS WILL GIVE A POOR COOKING RESULT.
When stir fry cooking and a
high heat is required, set
temperature dial to ‘High
Sear’ and allow thermostat
light to cycle on and off
several times. This will
allow the cooking surface
to adjust to a more accurate
cooking temperature.
The Avance Gourmet Wok
must be used with the
temperature control probe
provided. Do not use any
other temperature control
probe or connector.
•
•
Allow the Avance Gourmet Wok to cool
down before cleaning.
•
•
Before cleaning switch the wok ‘off‘ and
unplug from the power outlet. Remove
the Temperature Control Probe from the
socket in the appliance by depressing
the ‘easy release’ lever on the side of
the probe.
•
•
Do not leave plastic cooking utensils
in contact with the Avance Gourmet Wok
while cooking.
TEMPERATURE CONTROL PROBE
•
•
If cleaning is necessary, wipe over the
unit with a slightly damp cloth.
Storage : Store the control probe carefully.
Do not knock or drop it as this can damage
the probe. If damage is suspected, return
the Control Probe to your nearest Breville
service centre for inspection.
5. When cooking is completed, turn
temperature control dial to the ‘off’
position (‘0’ on dial) before switching off
at the power outlet. Unplug from power
outlet. Leave temperature control probe
connected to the appliance until cool.
BR4875 EW30 Avance Wok book.qxd 14/1/04 10:45 AM Page 8
