33
3
1
Steam Generator Base unit
The base unit is large and should
always be positioned on a stable
work surface.
2
Water tank with Anti-Calc system
This water tank incorporates an anti-
calc cartridge which removes
limescale deposits and prolongs
the life of your iron. This is situated
inside the water tank.
3
Maximum water level indicator
Water should only be added up to
the ‘MAX’ level indication
(maximum water capacity:
1
litre).
4
Water inlet
The water tank can be removed and
filled at the sink. Do not exceed the
MAX level marking.
5
Stainless steel soleplate
This durable soleplate transfers
heat evenly during ironing to
produce professional results.
6
Steam button
Press and hold this button to
produce a continuous burst of
steam to remove stubborn creases.
The steam button will also work
when the iron is held vertically.
This is ideal for removing creases
and wrinkles from delicate fabrics
or difficult to iron items, such as
curtains.
7
Temperature settings display
The selected temperature light will
flash when iron is heating. When
the iron has reached the desired
temperature, the light will stop
flashing and light continuously.
The temperature indicator lights will
flash on and off during ironing as
the iron maintains the soleplate
temperature.
8
Temperature / Standby select
button
To set the soleplate temperature,
press the temperature select button
to cycle through the four
temperature settings.
9
Steam / Power pipe
The steam / power pipe feeds
steam and power from the base
unit into the iron.
10 Control panel
This panel allows you to set the
desired amount of steam. The
display clearly indicates when the
filter cartridge is fitted correctly and
when it needs to be changed.
11
Iron rest
The iron rest provides a stable rest
for the iron. The heat-resistant
rubber fins hold the iron securely in
place and protect the soleplate.
FEATURES
