10
Assembly
1. Place the motor base on a flat, dry surface
such as a counter-top. Ensure that the
juice is turned OFF and the power cord is
unplugged.
2. Place the integrated pulp container on top
of the motor base. Locate the integrated
pulp container so that the spout fits through
the hole on the front of the motor base.
3. Align the arrows on the Nutri Disc™ with
the arrows on the motor drive coupling and
push down until it clicks into place. Ensure
the Nutri Disc™ is fitted securely inside
the integrated pulp container and onto the
motor base.
4. Place the juicer cover over the Nutri Disc™
and integrated pulp container. The ridges of
the rim of the juicer cover should align with
the small plastic wings on the integrated
pulp container. Lower into position.
NOTE
The juicing cover can be positioned in either
of the plastic wings on the integrated pulp
container.
5. Raise the safety locking arm up and lock
into the two grooves on either side of the
juicer cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juicer cover.
6. Slide the food pusher down the feed chute
by aligning one of the grooves in the food
pusher with the small bump on the inside of
the top of the feed chute. Continue to slide
the food pusher down the feed chute.
Summary of Contents for Juice Fountain BJE200
