11
Care, Cleaning
& Storage
The air purifier and filter should be cleaned at
least once every month. Ensure the air purifier
is switched off and disconnected from the
power outlet and allow all parts to cool before
cleaning or storing.
•
Use a clean, dry cloth to clean all external
surfaces of the air purifier.
•
Store the air purifier in an upright position.
Do not store anything on top of the air
purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
•
Always ensure the air purifier is turned
off, switched off at the power outlet and
unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
8
8
DO NOT
stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
8
DO NOT
use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
8
NEVER
use alcohol or other solvents
on this unit.
CLEANING THE SENSOR
•
It is important to keep the air quality sensor
clean for best performance.
•
The air quality sensor is situated behind a grill
at the rear of the unit.
•
Gently vacuum the air quality sensor grill
using a small hand brush tool. Cleaning
should occur regularly, at least once a month.
•
If more dust can be seen on the sensor behind
the grill then remove the cover by using the
raised tab on the edge of the cover. Push
inwards and outwards simultaneously to open
the cover, noting that it will be tight.
•
Gently vacuum the metal shield of the air
quality sensor using the hand brush tool.
•
Replace the cover when clean, ensuring it
clicks into place.
WARNING
The air quality sensor is fragile and can be
damaged if excessive force is used during
cleaning. Please use extra care when cleaning.
FILTER CLEANING AND REPLACING
WARNING
The filter is not washable. Do not immerse any
part of the air purifier in water as it will cause
damage.
•
The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such as
a brush or upholstery tool. Clean more often if
required.
•
Do not attempt to clean the carbon filter with a
vacuum as this can cause damage.
•
Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
•
Replace the filter as indicated using the
instructions following.
LAP300_ANZ_IB_C19.indd 11
19/3/19 4:07 pm
