background image

12

OPERATING yOUR BREvILLE ‘LIFT & LOOK’™ TOUCH

CRUMPET BUTTON

This feature activates additional heat to  

the middle heating elements to perfectly 

toast crumpet tops and lightly toast the 

crumpet bases.

To toast crumpets:

1. 

Place crumpets into the toasting slots 

with crumpet tops facing inwards as per 

the crumpet markings above the middle 

elements of the toaster.

2. 

Select desired browning setting by 

adjusting the browning control slide on 

the front of the toaster. The browning 

settings range from ‘1’ (lightest) to ‘5’ 

(darkest).

3. 

Press the TOAST/CANCEL button  

and the surround will illuminate in 

red then press the CRUMPET button 

and the surround will illuminate in 

white. The crumpets will automatically 

lower into the toasting slots. The 

middle and side heating elements will 

automatically adjust. 

4. 

The LIFT & LOOK™ button surround 

will also illuminate in white allowing the 

toasting progress to be checked and, if 

necessary, cancel the cycle by pressing 

the TOAST/CANCEL button when the 

desired toast colour is achieved.

5. 

Approximately 10 seconds before the 

end of the selected browning setting, 

the LIFT & LOOK™ button will cease 

illumination. As the toasting stops and 

the carriage rises, the TOAST/CANCEL 

button surround will flash and the LED 

toasting progress indicator will cease 

flashing. The LED toasting progress 

indicator will re-illuminate to the 

previously selected browning setting. 

6. 

Once toasting cycle has finished and 

the carriage has risen and locked into 

the raised position, the toast ready alert 

will sound. Remove the crumpets. The 

TOAST/CANCEL button surround will 

re-illuminate in white for up to  

30 seconds, ready for the next toasting 

cycle. The CRUMPET button surround 

will remain illuminated and should be 

pressed once to cancel if a subsequent 

toasting function is required. The 

CRUMPET button surround will cease 

to illuminate after 30 seconds or when 

the appliance is switched off at the 

power point.

NOTE

Place the crumpets into the toasting 

slots with crumpet tops facing inwards 

as per the crumpet markings above the 

middle elements of the toaster.

dEFROST BUTTON

This feature activates additional toasting 

time required to toast frozen bread.

To toast frozen bread:

1. 

Place bread into the toasting slots.

2. 

Select desired browning setting  

by adjusting the browning control 

slide on the front of the toaster. The 

browning settings range from ‘1’ 

(lightest) to ‘5’ (darkest).

3. 

Press the TOAST/CANCEL button and 

the surround will illuminate in red then 

press the DEFROST button and the 

surround will illuminate in white. The 

bread will automatically lower into the 

toasting slots. The toasting time will 

automatically increase.

Summary of Contents for Lift & Look Touch

















Reviews: