Breville Lift & Look Touch, Instruction Booklet

13

OPERATING yOUR BREvILLE ‘LIFT & LOOK’™ TOUCH

4. 

The LIFT & LOOK™ button surround 

will illuminate in white allowing you to 

check on the toasting progress and, if 

necessary, cancel the cycle by pressing 

TOAST/CANCEL button when the 

desired toast colour is achieved.

5. 

Approximately 10 seconds before the 

end of the selected browning setting, 

the LIFT & LOOK™ button will cease 

illumination.  

As the toasting stops and the carriage 

rises, the TOAST/CANCEL button 

surround will flash and the LED toasting 

progress indicator will cease flashing. 

The LED toasting progress indicator will 

re-illuminate to the previously selected 

browning setting. 

6. 

Once the toasting cycle has finished 

and the carriage has risen and locked 

into the raised position, the toast ready 

alert will sound. Remove the toast. The 

TOAST/CANCEL button surround 

will re-illuminate in white for up to 30 

seconds, ready for the next toasting 

cycle. The DEFROST button surround 

will remain illuminated and should be 

pressed once to cancel if a subsequent 

toasting function is required. The 

DEFROST button surround will cease 

to illuminate after 30 seconds or when 

the appliance is switched off at the 

power point.

LIFT & LOOK™ BUTTON

This feature automatically raises and lowers 

the carriage so you can check progress 

without interrupting and/or cancelling the 

toasting cycle. 

To select this feature:

1. 

The LIFT & LOOK™ button surround 

will illuminate in white during the 

toasting cycle and when using the A 

BIT MORE™, CRUMPET and DEFROST 

features. You can press the LIFT & 

LOOK™ button during toasting cycle to 

view the toasting progress. If selected, 

the LIFT & LOOK™ button surround 

will flash. The LED toasting progress 

indicator will cease to flash indicating 

that the selected toasting cycle time has 

not been interrupted. When the LIFT & 

LOOK™ cycle has finished, the toasting 

cycle will re-commence, indicated by 

the resumed flashing of LED toasting 

progress indicator.

2. 

Approximately 10 seconds before the 

end of the selected browning setting, 

the LIFT & LOOK™ button will cease 

illumination and cannot be activated in 

this time.