Care, cleaning and storage
11
When finished processing, follow instructions How to
Disassemble the Mini Wizz
Cleaning
Motor base
Wipe the motor base over with a clean damp
cloth after each use.
Other parts
Hand wash the bowl, processing lid, storage lid,
chopping/mixing blade and whisk in hot soapy
water using a mild detergent. Rinse and dry
thoroughly with a soft cloth. Do not use steel
wool, scouring pads or abrasive cleaners, as
these will scratch the surfaces.
It is not recommended to wash any parts of this
appliance in a dishwasher as exposure to harsh
detergents and hot water temperatures will damage
and shorten the life of the plastic parts.
The chopping/mixing blade is very sharp so
handle with care at all times. Use extreme care
when washing. To avoid accidental cuts do not
leave blade to soak in sudsy water.
Note
Food Stains and Odours
Food such as carrot may leave a stain on plastic parts
whilst other foods such as garlic will leave a strong
odour. To remove either, soak the parts for 5 minutes
in 1 litre water with
1
⁄
4
cup lemon juice.
Storage
Before storing, thoroughly dry all parts. Store the
Mini Wizz assembled, with the chopping/mixing
blade in place in the bowl, on the kitchen bench
or in an easy to access cupboard. Store the blade
out of reach of children. Store the appliance upright.
Do not store anything on top of the appliance.
The chopper cutting blade is very sharp, use
extreme care when storing.
Note
Note
NEVER IMMERSE THE MOTOR BASE, CORD OR POWER PLUG IN WATER OR ANY OTHER LIQUID.
