Breville Quick Time BIC300, Instruction Booklet

14

PAGE HEAdER.....

OPERATING yOUR BREvILLE - THE QUICK TIME

™

8. 

When cooking is complete, press the 

power on/off   button once to the 

standby mode. A beep will sound. Switch 

‘off’ at the power outlet and unplug the 

power cord.

NOTE

Temperature can be adjusted at any 

time during the cooking process, 

and the Breville induction cooker 

temperatures can be lowered or 

increased on a scale of 60˚C to 220˚C.

TIMER MOdE

1. 

Power level and/or Adjustable 

temperature mode must be selected 

prior to setting the Timer mode.

2. 

To select the Timer mode, press the 

mode button once, a corresponding 

indicator light will illuminate on the 

LED screen adjacent to the timer mode 

 icon. A beep will sound. 

3. 

Select the desired Time using the Control 

dial. Turn dial clockwise to increase time 

and anti-clockwise to decrease time. The 

time is adjustable on a scale from  

1 minute to 180 minutes. A beep will 

sound each time the timing is changed. 

4. 

During the selection period, the  

LED screen will continue to flash,  

when the desired time has been 

selected, the LED screen will cease 

flashing after approximately 5 seconds 

and display selected. 

NOTE

Turning the control dial slowly 

increases or decreases the timing 

by 1 minute increments, allowing 

for accurate selection. A beep will 

sound each time the time is changed. 

Turning the control dial very quickly 

clockwise increases timing by  

10 minute increments, anticlockwise 

decreases increments by 10 minute 

increments fast motion selection.

5. 

Timer count down then commences 

and when the selected time has lapsed, 

a beep will sound 5 times and the 

induction cooker will automatically 

switch to stand-by mode.

NOTE

The Timer mode does not need to be 

set to use the Power level mode or 

Adjustable temperature mode.  

To readjust power level and 

temperature during cooking with 

timer mode, switch off the appliance, 

switch back on and reset.

WARNING

If the Breville induction cooker detects 

the temperature on the glass ceramic 

plate surface exceeding 100°C during 

cooking, the heating process will cease 

and the stand-by mode will activate for 

60 seconds to reduce the temperature. 

At the same time, the LED screen will 

display the error message 

E6

. This 

error message will turn off when the 

temperature falls below 100°C.