Breville TempSet LKE842, Instruction Book

10

Always switch off at the power outlet and 

unplug the appliance from the power outlet 

before cleaning.

REMOVABLE FILTER

The Breville TempSet™ Kettle features a 

removable mesh filter to remove scale deposits 

for cleaner water. To clean the scale deposits 

from the filter, remove the filter by opening the 

lid and sliding the filter up and out of the kettle.
The filter can be cleaned by placing under 

running hot water and rubbing with a cleaning 

cloth or brush. To replace the filter, simply slide 

the filter down into the slot behind the spout of 

the kettle and push back into position.

NOTE

The filter could become damaged with time, so 

check regularly and replace if found damaged.

WARNING

Never immerse the kettle base, power base, 

power cord or power plug in water, or allow 

moisture to come into contact with these parts.

WARNING

To prevent damage to the kettle do not use 

chemicals, alkaline cleaning agents, steel wool 

or abrasive cleaners to clean the inside or 

outside of the kettle. Use a mild cleaning agent 

with a soft damp cloth.

MINERAL DEPOSITS AND 
DISCOLOURATION 

Due to the large surface area of the immersed 

element (interior base), discolouration due to 

mineral deposits from tap water may appear 

more obvious by leaving a brown stain on the 

base. THIS IS NOT RUST. Discolouration may 

be removed by purchasing the Breville Kettle 

Cleaner and following the instructions on 

the packaging.

ALTERNATIVELY:

1.  Fill the kettle until 2⁄3 full with 1 part 

vinegar (or a few slices of lemon) and 2 

parts water, bring to the boil and allow to 

stand overnight.

2.  Empty the solution from the kettle. Fill the 

kettle with clean water, bring to boil and 

discard the water. Repeat and the kettle will 

be ready for use.

TO CLEAN THE EXTERIOR

The exterior of the kettle and power base 

should be wiped with a damp cloth then 

polished with a soft, dry cloth.

NOTE

Do not use chemicals, steel wool, or abrasive 

cleaners to clean the inside or outside of the 

kettle or power base.

STORAGE

Ensure the kettle is switched off, clean and dry 

before storing. Ensure that the lid is closed and 

locked securely into place. Wrap the power 

cord around the power cord storage under the 

power base. Stand the kettle upright on the 

power base. Do not store anything on top.

Care, Cleaning & Storage