5
•
Always turn the temperature control probe to ‘MIN’,
then switch off at the power outlet, then unplug
the appliance when not in use, before attempting
to move appliance and before cleaning or storing.
•
This appliance is for household use only. Do not
use this appliance for other than its intended use.
Do not use outdoors.
•
Any maintenance, other than cleaning, should be
performed at an authorised Breville Service Centre.
•
Regularly inspect the supply cord, plug and actual
appliance for any damage. If found damaged in any
way, immediately cease use of the appliance and
return the entire appliance to the nearest
authorised Breville service centre for examination,
replacement or repair.
•
The installation of a residual current device (safety
switch) is recommended to provide additional safety
protection when using electrical appliances. It is
advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed
in the electrical circuit supplying the appliance.
See your electrician for professional advice.
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
Read all instructions before operating and save for
future reference
•
If using plastic utensils, do not leave in cooking
vessel when hot.
•
Never immerse cord and/or Temperature Probe in
water or any other liquid.
•
Do not place hot glass lid under cold water.
•
Avoid using on metal surfaces eg sink, hotplate.
•
Always switch off, unplug and then remove
temperature control probe before cleaning
the appliance.
•
Extreme caution must be used when the appliance
is filled with hot oil or other liquid. Do not move
the appliance during cooking and allow it to cool
before removing oil or other liquid.
•
Always insert temperature control probe into probe
socket before inserting power plug into power
outlet and switching on appliance. Ensure the probe
socket is completely dry before inserting the
temperature control probe.
•
Place frypan at least 200mm away from walls
and curtains.
•
Do not touch hot surfaces.
•
Do not leave the appliance unattended when
in use.
•
Always use the appliance on a dry, level surface.
•
The appliance is not intended for use by young
children or infirm persons without supervision.
•
Young children should be supervised to ensure that
they do not play with the appliance.
•
Do not let the cord hang over the edge of a table
or counter, touch hot surfaces or become knotted.
•
Do not place this appliance on or near a hot
gas or electric burner, or where it could touch a
heated oven.
4
