7
Assembly
ASSEMBLING THE CITRUS PRESS
1. Pull the Juice Press Arm up and
backwards, away from the Motor Base, until
fully extended.
2. Place the Juice Collector onto the Drive
Shaft on top of the Motor Base, ensuring
the Juice Spout fits into the semi-circular
groove at the front of the Motor Base.
3. Insert the Stainless Steel Filter into the
Juice Collector, aligning the indent with
arrow in the bottom of the Filter over
the corresponding tab with arrow in the
Juice Collector.
4. Place the Juicing Cone onto the Drive Shaft
and press down lightly to lock the Cone
into position.
Summary of Contents for the Citrus Press Pro
