Breville VCF041, User Manual

9

 DO NOT USE FRESH OR GROUND COFFEE PRODUCTS. YOUR 

BREVILLE MOMENTS

™

 HOT DRINK MAKER

IS DESIGNED TO USE INSTANT 

COFFEE AND HOT CHOCOLATE. FOR BEST RESULTS ADD MALTED MILK 

DRINK PRODUCTS DIRECTLY TO THE CUP. DO NOT USE SACHETS OF INSTANT 

CAPPUCCINO OR LATTE IN THIS UNIT.
To prevent damage, never use your Breville Moments

™

 hot drink maker without 

water.
The time taken for your Breville Moments

™ 

hot drink maker to heat the water fully 

will depend on the amount of water in the water boiler.
For safety purposes, the water boiler cap cannot be removed when pressure builds 

in the water boiler as a result of the water heating. The water boiler cap will spin 

freely if you try to remove it during use. You must wait for the unit to cool down 

fully before removing the cap.
Ensure that the control lever is in the OFF position when the milk tank assembly is 

detached from the main housing unit.
Do not operate the unit without the mixing chamber in place on the milk tank 

assembly.

1. 

If you have not used the unit for a while, check that there is water in the boiler. The 

maximum fill capacity is 400ml. If the unit was disassembled after last use, make 

sure that the milk tank assembly is fully inserted into the main housing unit.

2. 

Plug the unit into the mains supply, and turn the control lever to the HEAT UP 

position ( ). The power indicator light will flash.

making coffee

q

w