1
blending
what it’s for
The blender of your food processor can be used to blend soups, make sauces, smoothies,
milkshakes, frappés, baby food, fruit, thin batters, in fact lots of things!
fitting it
Rotate the safety cap anticlockwise until the symbol on the cap lines up with the arrow
on the base unit.
Remove the safety cap
Fit the blender jug to the base unit lining up the symbol on the base of the jug with the
arrow on the base unit.
Rotate the blender jug clockwise until the symbol lines up with the arrow.
Fit the lid and stopper onto the blending jug. Ensure that the lip of the blender lid is
positioned to the left of the spout on the blender jug as shown.
Rotate the lid clockwise until the dot on the handle and the dot on the lid are opposite each
other and the lid locks into place.
using it
For the blender to operate, the processor bowl and lid must be correctly fitted. It’s best not to
have any attachment (chopping blade, whisk, etc.) fitted to the processor drive shaft.
Add the ingredients to the blending jug, refit the lid and stopper and press one of the programmed
blending buttons (Batter, Smoothie, Puree or Mayo).
Further ingredients can be added by stopping the blender and removing the stopper or the lid.
Replace the stopper or lid before starting the blender again. Don’t overfill the blending jug. Cut
large pieces of food into .5cm (1”) cubes.
A red indicator light will illuminate above the chosen button when the blender is running. The
indicator will go out when the program finishes.
Don’t forget that some blending programs will cause your blender to operate at different speeds
during the cycle, or stop and start during use. This is completely normal.
cleaning it
It’s best to clean your blender as soon as you have finished using it. When you have emptied the
contents of the blending jug, refit it to the base unit and:
A
Fill the blending jug a quarter full with warm water and add one drop of washing up liquid.
B
Refit the lid and stopper onto the blending jug.
C
Press the Pulse button for a few seconds.
D
Remove the blender jug and rinse it out with clean running water.
E
Dry the jug, lid and stopper with a soft cloth. Always make sure that the base of the blender
jug is completely dry before using it again.
Never use any harsh abrasive cleaning products to clean your blender jug or any other part of
your food processor.
1.
.
.
4.
5.
6.