Important Information
Read all instructions and safeguards included in the packaging carefully and
completely before installing or operating this equipment. Save all instructions for
future reference.
To reduce the risk of fire or electric shock, do not remove covers. There are no user
serviceable parts inside. Repairs should be done by authorized service personnel
only. If this appliance should fail to operate properly, contact the nearest Brewmatic
Authorized Service Center or you can contact Brewmatic direct at 800-421-6860.
Only Authorized Replacement Parts Should Be Used.
Part substitutions could
create a fire hazard and the risk of personal injury. The use of replacement parts or
accessory attachments not recommended by Brewmatic may be hazardous.
Do Not By-Pass Any Safety Mechanisms Or Operate This Appliance Without
Covers In Place.
Brewmatic requires that all safety devices and covers be in place
and functioning at all times to guard against a fire hazard and the risk of personal
injury.
Brewmatic Does Not Recommend, And Will Not Furnish Anyone With
Information For Changing The Electrical Rating Of Any Appliance Manufactured
Or Distributed By Brewmatic.
Brewmatic will not approve of any unauthorized
changes to the basic design of this appliance. Any modification or alteration to the
appliance may create a fire hazard, may create a risk of personal injury, may void the
safety listings and may void the warranty.
All procedures, diagrams and specifications contained in this manual are based on
the latest information available at the time of publication. Information, parts and
specifications are subject to change without notice.
Due to periodic reviews and changes in listing standards, listings and approvals may
change at any time. For current listing and approval information contact Brewmatic.
Plumbing connections -
All plumbing connections to water supply lines and drains
should be performed by a licensed plumber complying with all applicable plumbing
codes having jurisdiction.
Electrical connections -
With the exception of cords with plugs already attached, all
electrical connections or alterations to the power supply should be performed by a
licensed electrician complying with all applicable electrical codes having jurisdiction.
When calling for information, parts or service, have the following information
available:
Model Number:
Serial Number:
Voltage:
Wattage:
Amps:
Phase:
Date Of Purchase:
Electrical information may be obtained from the electrical information nameplate
located on the appliance.
Page 2
COMK211
