Page
2
of
10
Last Updated 28/09/2020 3:09 PM
Pump Servicing and Cleaning
The BrewZilla units are a reliable and an easy to maintain brewery. Under normal
circumstances it’s unlikely that you will be required to open, clean, or replace the pump.
With that said it is possible if something drops into the pump inlet causing a pump
blockage, or if mold starts to grow in the pump head (happens if the pump is not
sufficiently cleaned after use), or of the pump is just damaged for some reason then it
might be possible to remove the pump from the BrewZilla.
NOTE:
NEVER clear a blocked pump by spraying water down the recirculation
arm or directly into the pump inlet, instead follow the instructions in this manual
and disassemble the pump to look for any blockages in the pump head.
