Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
65005
roll ’n go
™
car seat transporter
3.
Unbuckle attachment strap by pinching the ratchet
release tab while simultaneously sliding ratchet ladder
strap from ratchet buckle.
Ratchet Buckle
Ratchet Ladder Strap
Ratchet Release Tab
Lift buckle
housing to
tighten
To Tighten
Pinch
together
To Release
5.
Route the attachment ladder strap through the forward-facing belt path route. Refer
to child safety seat user guide for belt path routing details.
6.
Insert the ratchet ladder strap into the ratchet buckle approximately 5 clicks.
Remove all slack from the attachment strap by adjusting strap length with slider.
7.
Continue to tighten the attachment strap with the ratchet buckle by lifting and
releasing the buckle tab until seat is secure. DO NOT over tighten.
4.
Place forward-facing child safety seat on platform such that
seat sits flat on the ground with the back of the seat base against
the transporter.
IMPORTANT:
You must position the child safety seat in its most
upright (forward facing position). Some child safety seats may
require the removal of a recline block. Refer to child safety seat
user guide for details.
