Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
65005
roll ’n go
™
car seat transporter
8.
It is recommended that you also attach
the child safety seat’s tether strap to the
tether attachment point recessed in the
transporter carry handle, removing all slack
in the tether strap. Store excess tether
strap webbing. Test seat and transporter
attachment prior to boarding child.
9.
Board child and properly buckle as per the child safety seat user guide.
10.
Raise telescoping handle to desired position by depressing push release button located
on handle. The handle will lock into one of two raised positions.
11.
Pull back on handle to raise front of child safety seat for transport. Pull (or push) through
the airport with ease!
NOTE:
In some circumstances it may be helpful to place your foot behind transporter wheel to
“block” the wheel while pulling back on handle. This will make it easier to raise front of seat.
1.
With child and child safety seat removed from transporter, lower telescoping handle by
depressing push release button on handle and pushing handle down.
2.
Raise base platform to closed position.
3.
Depress each wheel lock button and slide to outside of transporter. With button held in this
position, begin to fold wheel into closed position. Release button and continue folding wheel
to closed position. An audible click will be heard and the wheel lock safety indicator will turn
green when wheel locks into closed position.
4.
When folded, you may store your BRICA Roll ’n Go
™
Car Seat Transporter
in the overhead bin of an aircraft.
To Store
