Brickhouse Security B-Link Secure Cellular IP Camera Solution, User Manual

Installing your Device

Step 1:

 Attach the antennas. The B-Link Secure IP Camera Solution router is 

shipped with caps on the Cellular, WiFi and GPS antenna sockets. To attach 
the supplied antennas, first remove the socket caps from the antenna sockets 
then screw the antennas onto the sockets by turning them in a clockwise 
direction. Please refer to the Device overview section for the antenna socket 
layout. If you have purchased a GPS antenna, remove the socket cap from 
the GPS antenna socket and attach the antenna to the socket in the same 
manner.

Step 2:

 Connect the power and Ethernet cables Connect the included power 

supply cable. 

Note:

 If installing into a Vehicle connect the Molex Mini-Fit 

or receptacle and then connect the green and white breakout wires to the 
ignition and I/O connections as required. Connect the Power (red) and the 
Ground (black) wires to your power source. 

The power LED on the router lights up when a power source is connected. 
Attach the supplied Black Ethernet cable to the LAN Ethernet port on your 
router and the other end to your computer.