Bridge BRDSC01 v4
User Manual
13
- platform: mqtt
name: Main Door
state_topic: "DSC010000000001/Zone1"
device_class: "door"
payload_on: "1"
payload_off: "0"
- platform: mqtt
name: IRP Living Room
state_topic: "DSC01xxxxxxxxxx/Zone2"
device_class: "motion"
payload_on: "1"
payload_off: "0"
Depending on the used interface on Home Assistant
groups.yaml
or
lovelace.yaml
files may
need to be updated in order to display components.
Additionally, an access code needs to be configured to use the MQTT Alarm Control Panel
component. See "Access Code" on "Advance Configuration".
Others MQTT home automation systems
This device can be integrated with any application or system that supports MQTT protocol.
Most known systems are Home Assistant, OpenHab and Hubitat.
Refer to the application or automation system documentation to know how to configure
MQTT options.
Hardware and Firmware versions
If knowing the hardware version of the device is needed, it can be found printed on the board.
Refer to me image on the overview section of this document to know where to find it.
The firmware version the device was shipped from factory with, can be found on the printed
label sticked on the packaging of the product or can be queried by scanning the QR code.
Since firmware can be updated, the current one could differ from the one originally shipped
from factory. If the current firmware was officially provided by Coiaca, its version can be found
on the config screen when connecting to the device via Wifi, on AP mode, at the bottom, next
to the APPLY button.
