Bridge BRDSC01 v4
User Manual
15
It´s a good practice to configure a user code on the alarm system to be used
exclusively with the device as Access Code in order to be able to identify the
usage on the alarm system log.
Status Topic
The Status Topic is the MQTT topic where the device will publish the Birth Message when
connected to the broker, and the Disconnected Message, is case connection with DSC alarm
system is lost.
Birth Message
Is the payload of the birth message that the device will publish every time it connects to the
MQTT broker or reconnects to DSC alarm system.
Default value is “online”
LWT Message (Last Will Message)
Is the payload of the message that the broker will publish automatically on the Status Topic
when the device disconnects from the broker.
Default value is “offline”
Disconnected Message
Is the payload of the message that the device will publish on the Status Topic when connected
to the broker but conne
ction with the DSC alarm system is lost. Default value is “
Alarm
Disconnected
”
Partition Topic Prefix
The device will append the partition number to this prefix to build the topic where the
partition state will be published.
For instance, if this parameter is set to DSC010000000001/Partition the state of partition 1 will
be published on topic DSC010000000001/Partition1, the state of partition 2 will be published
on DSC010000000001/Partition2 and so on and so forth.
Payloads for partition states are: disarmed, armed_away, armed_home, triggered and
pending.
Active Partition Topic
The device will publish the active partition on this topic. Meaning that every time user change
to a partition to send a command, this data will change.
Zone Topic Prefix
The device will append the zone number to this prefix to build the topic where the zone state
will be published.
For instance, if this parameter is set to DSC010000000001/Zone the state of zone 1 will be
published on topic DSC010000000001/Zone1, the state of zone 2 will be published on
DSC010000000001/Zone2 and so on and so forth.
Zone payloads are 1 for active and 0 for inactive.
