Bridge BRDSC01 v4
User Manual
9
Device Configuration
WiFi and AP configuration
Every time device starts will be on AP mode (Access Point) for 30 seconds allowing clients to
connect directly to make the configuration. Also, when no WiFi network is configured, or the
configured network is unavailable, the device will listen for connections as AP.
•
Search for available Wi-Fi networks.
•
Connect to a network with SSID like coiaca-
xxxxxxxx (where xxxxxxx is the deviceID of
your device)
•
Use configured password to connect. If
device is new, you will find the password on
the label sticked on the device. If you don´t
know the current password, see below.
Once connected, a welcome page will show up. Click
or tab on “Config” to enter configuration pa
ge.
