Copyright © Bridgetek Pte Ltd
10
PanLHub44/80 Datasheet
Version 1.0
Document Reference No.: BRT_000277 Clearance No.: BRT#146
5.1 Power Supply
5.1.1
PanLHub44
The PanLHub44 is powered by a 24VDC/2.5A adaptor which is provided along the package. Use of any
other power supply is highly not recommended to ensure that the hub operates within specification limits.
5.1.2
PanLHub80
The PanLHub80 is powered by a 24VDC/5A adaptor which is provided along the package. Use of any
other power supply is highly not recommended to ensure that the hub operates within specification limits.
5.2
CPU System
Both PanLHub44 and PanLHub80 run on Linux platforms and are powered by a Quad Core 1.2GHz 64bit
ARM Processor.
5.3
Wireless Connectivity
PanLHub44 and PanLHub80 can house different wireless connectivity modules depending on the wireless
devices that are required by the user. Please refer to Ordering Information 2.1 and 2.2 for more details.
5.3.1
Wi-Fi
The Wi-Fi module provides an alternative option to connect to a local network to communicate with other
Wi-Fi enabled devices if Ethernet network cable wiring is not feasible.
Standard: IEEE 802.11 b/g/n Wi-Fi Module
Data Rate: Up to 150Mbps
Antenna: Integrated 2.4 GHz PCB Antenna
5.3.2
ZigBee
The ZigBee module is powered by the latest System-On-
Chip (SOC) from Texas Instruments™: the
CC2538 and it uses an on-board antenna.
The CC2538 is an integrated platform for IEEE 802.15.4 ZigBee® applications.
The device integrates a low power 2.4 GHz transceiver, an MCU based on an ARM Cortex-M3 core (32 bit)
and a hardware accelerator for the IEEE 802.15.4 MAC layer.
5.3.3
RF433
The RF433 module operates on 433.926MHz frequency, ASK/OOK modulation and up to 4.8kbps speed
transmission rate.
5.4
Power Indicator
A red colour LED indicator to indicate the power status (ON/OFF) of the PanLHub44 and PanLHub80.
