— 34 —
"BRIG" inflatable boats
z
Damage to one of air chambers
The inflatable boat is designed to provide an adequate stability in case of the complete damage to one of the air chambers (balloon
compartments) at the expense of the remaining air chambers and the hull. Thanks to it, you will be able to reach safely the nearest shore.
Reduce the speed and shift your body to the undamaged part of the boat. Observe changes in stability. After that, immediately head for the
nearest shore. To prevent penetration of water into the boat, pull the shell of the damaged air chambers upwards.
z
Towing
At towing the towing rope length should not be less at least 3 lengths of the boat.
The steersman of the towed boat should be assisted by another crew member to monitor
the process of towing. In this case, certain communication gestures should be agreed upon
beforehand.
Approaching to rocky shores, shoals, moles, etc. , please be careful to avoid damages of your
boat. It is strictly prohibited to drag the boat across rough surfaces (shingle, rocks, concrete, etc.).
In case of prolonged navigation with the use of an outboard motor, regularly check, that the
motor is reliably attached to the boat. If the engine was attached carelessly, the attachment
may loosen under the action of vibration.
Besides, at regular intervals, please check air chambers pressure , since the pressure may
vary under the effects of outside air temperature and atmospheric pressure variations.
Never forget to monitor regularly the quantity of fuel in the fuel tank. Keep always in mind
that the quantity of fuel should be sufficient for you to sail to your final destination.
The rope have to be attached to both boats in a manner ensuring its immediately, single-
motion release.
