2020
— 10 —
"BRIG"
TECHNICAL SPECIFICATIONS.
The basic parameters and dimensions of the boat N485 comply with the data specified in the following table. All dimensions
measurements indicated have a tolerance of +/- 3%, weight measurements indicated have a tolerance of +/- 5%.
*Maximum recommended load is including weight of the max engine(s), passengers and cargo onboard, but
excluding
the mass of the contents of fixed fuel tank when full
**For American market only
Par am eter
N485 (N485H)
Length (without engine)
Beam
Height
Inflatable tube diameter, max.
Cockpit dimensions:
- length
- width
Deadrise angle on transom
Deadrise angle in middle section
Transom height
Number of independent air-tight chambers
Nominal pressure
Passengers capacity
Recommended engine power
Maximum engine power*
Maximum engine weight (included controls and battery)
Engine shaft length
Built-in fuel tank capacity
W eight of fully empty boat (without: steering console, arc,
seat, fuel, engine)
W eight of empty boat with equipments (with steering console,
with S.S.arc, with seat, without engine, without fuel)
Maximum load capacity of fully empty boat (ISO method)
Displacement in Light Craft Condition (LCC)
Maximum total load (ML)
Maximum recommended load*
Loaded displacement mass (LDC)
4.85 m
2.30 m
1.85 m
0.50 m
3.05 m
1.30 m
19°
22°
500mm
5
0.15 bar (2.2 psi)
7 (8**)
50 hp ( 37 kW )
75 hp ( 56 kW )
210kg
20" (Long)
67L
295kg
380kg
1050kg
600kg
745kg
905*kg
1345kg
