Basic operations
The dashboard camera turns on and starts recording as soon as engine starts.
After the engine stops, the camera stops recording and shuts down, immediately
or after a delay (configurable in settings).
To turn camera on or off, press and hold [
] button for at
least seconds.
Once turned on, your dashboard camera starts recording immediately. When it is
recording, indicator light blinks red and there is a flashing red dot on the display.
To stop or start recording, press [
] button.
1
Turning your dash cam on and off
Starting and stopping recording
NOTE:
Pull out the power adapter from cigarette lighter socket if you plan to
leave your vehicle for more than several days. Power adapter has electronic
components that consume some electricity – barely noticeable, but enough to
drain the battery, especially if the battery is not new.
+-
