background image

80004543EN (Rev. E)

 

BRIGGS & STRATTON PRODUCTS WARRANTY POLICY 

LIMITED WARRANTY

Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship 

or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for and 

is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at www.

BriggsandStratton.com. The purchaser must contact the Authorized Service Dealer, and then make the product available to the Authorized Service Dealer for inspection 

and testing.

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular

 

purpose, are limited to the warranty 

period listed below, or to the extent permitted by law

Liability for incidental or consequential damages are excluded to the extent exclusion is permitted 

by law. 

Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have 

other rights which vary from state to state or country to country.

**

WARRANTY PERIOD

**

 In Australia - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major 

failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be 

of acceptable quality and the failure does not amount to a major failure. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at 

BRIGGSandSTRATTON.COM, or by calling 1300 274 447, or by emailing or writing to salesenquires@briggsandstratton.com.au, Briggs & Stratton Australia Pty Ltd, 1 

Moorebank Avenue, NSW, Australia, 2170.
The warranty period begins on the date of purchase by the first retail or commercial  consumer. “Consumer use” means personal residential household use by a retail 

consumer. “Commercial use” means all other uses, including use for commercial, income producing or rental purposes. Once a product has experienced commercial use, it 

shall thereafter be considered as a commercial use product for purposes of this warranty.
To ensure prompt and complete warranty coverage, register your product at the website shown above or at www.onlineproductregistration.com.
Save your proof of purchase receipt.  If you do not provide proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the product 

will be used to determine the warranty period. Product registration is not required to obtain warranty service on Briggs & Stratton products.

ABOUT YOUR WARRANTY

Warranty service is available only through Briggs & Stratton Authorized Service Dealers. Most warranty repairs are handled routinely, but sometimes requests for warranty 

service may not be appropriate. This warranty covers only defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper 

maintenance or repair, or normal wear and tear.

Improper Use and Abuse 

- The proper, intended use of this product is described in the Operator’s Manual. Using the product in a way not described in the Operator’s 

Manual or using the product after it has been damaged will not be covered under this warranty. Warranty coverage will also not be provided if the serial number on the 

product has been removed or the product has been altered or modified in any way, or if the product has evidence of abuse such as impact damage or water/chemical 

corrosion damage.

Improper Maintenance or Repair 

- This product must be maintained according to the procedures and schedules provided in the Operator’s Manual, and serviced or 

repaired using genuine Briggs & Stratton parts or equivalent.

 

Damage caused by lack of maintenance or use of non-original parts is not covered by warranty.

Normal Wear and Tear

 - Like most mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not cover repairs when normal 

use has exhausted the life of a part or the equipment. Maintenance and wear items such as filters, belts, cutting blades, and brake pads (except engine brake pads) are not 

covered by warranty due to wear characteristics alone, unless the cause is due to defects in material or workmanship.

Other Exclusions - 

This warranty excludes damage due to accident, abuse, modifications, alterations, improper servicing, freezing or chemical deterioration. Attachments 

or accessories that were not originally packaged with the product are also excluded. This warranty does not include used, reconditioned, second-hand, or demonstration 

equipment or engines. This warranty also excludes failures due to acts of God and other force majeure events beyond the manufacturer’s control.

Item

Consumer Use

Commercial Use

Accessory/Attachment

12 months

None

11

Not 

for 

Reproduction

Summary of Contents for 1696462-00













Reviews: