Assembly
WARNING
Disengage the electric clutch (PTO). Shut off the engine,
remove the key, and wait for all moving parts to stop
before attaching, adjusting, or disconnecting any part of
the collection system.
Install the Upright Support Assembly
1. Install the speed nuts (
A
, Figure 1) into the square
holes (
a
) of the rear frame support. The threaded side of
speed nut is installed on the inside of the frame support.
2. Install the shoulder bolts (
B
) into the speed nuts.
B
A
a
Figure 1
3. Put the upright support assembly (
C
, Figure 2) onto the
shoulder bolts.
C
Figure 2
Install the Baffles
For 46” Mower Decks
1. Put the deflector (
a
, Figure 3) in the vertical position.
2. Put the baffle (
D
) into the discharge opening. Attach the
left side of the baffle with a carriage bolt (
E
), spacer (
F
)
and a whiz lock nut (
G
).
E
D
a
G
F
Figure 3
3. Attach the right side of the baffle with a carriage bolt (
H
,
Figure 4) and a whiz lock nut (
G
). Make sure the blade
does not come in contact with the baffle.
H
G
Figure 4
I
- BAFFLE, 52”
(Qty. 1)
5
Not for Reproduction
