Install the Bagging Boot
For 46” and 52” Mower Decks
1. Make sure the latch hardware on the bagging boot (
X
,
Figure 12) is in the correct hole for the deck sizes. If
necessary, change location of the latch hardware.
46” Mower
52” Mower
X
Figure 12
2. Attach the left side of bagging boot onto the carriage
bolt assembly (
a
, Figure 13) installed on the deck.
3. Slide the top of the bagging boot below the deflector
mounting bracket (
b
).
4. Slide the tab (
c
) of the bagging boot into the mower
deck.
c
b
a
Figure 13
Frame Hung Mowers
1. Rotate the latch (
a
, Figure 14) into the space between
the spacer and the washer hardware (
b
).
a
b
Figure 14
2. Secure the hook (
c
, Figure 15) of the mounting strap
onto the gage wheel bracket (
d
).
c
d
Figure 15
Free Floating Mowers
1. Rotate the latch (
a
Figure 16) into the space between
the spacer and the washer hardware (
b
).
a
b
Figure 16
8
Not
for
Reproduction
