2. Secure the hook (
g
, Figure 17) of the mounting strap
onto the roller bar support bracket (
h
).
g
h
Figure 17
Assemble the Upper and Middle Tube
For 46” and 52” Mower Decks
1. Slide the middle tube (
Y
, Figure 18) into the upper tube
(
Z
).
2. Align the holes for the deck sizes and install the screw
(
AA
) into the upper tube and middle tube.
46” Mower
52” Mower
Y
AA
Z
46” Mower
52” Mower
Figure 18
3. Slide the ridge (
a
) on the upper tube into the cutout (
b
)
in the cover assembly (
N
).
b
a
N
Figure 19
4. Slide the middle tube (
Y
, Figure 19) over the bagging
boot (
X
). Attach the strap (
c
) over the pin (
d
).
d
c
Figure 19
Install the Collector Bags
1. Put the cover in the vertical position.
2. Attach the collector bags (
AB
, Figure 21) to the tabs (
a
)
on the cross support.
3. Close the cover.
AB
a
Figure 20
9
Not
for
Reproduction