background image

3

General Information

For additional information, refer to the 

Customer Contact

Guide 

included with the unit. 

The illustrations in this document are representative.

Your unit might look different from the images

shown. 

LEFT

 and 

RIGHT

 are referenced from the operator's

position. 
The use of Important and Note in the text shows clarifications,

exceptions, or alternatives to the procedures. 
All language translations of this document derive from the

initial English source file. 

Recycle all packaging, used oil, and batteries according to

applicable government regulations. 

Operator Safety

Safety Alert Symbol and Signal Words

The safety alert symbol 

 identifies safety information

about hazards that can result in personal injury. A signal word

(

DANGER

WARNING

, or 

CAUTION

) is used with the alert

symbol to indicate the likelihood and the potential severity of

injury. In addition, a hazard symbol may be used to represent

the type of hazard. 

 

DANGER

 indicates a hazard which, if not

avoided, 

will

 result in death or serious injury. 

 

WARNING

 indicates a hazard which, if not

avoided, 

could

 result in death or serious injury. 

 

CAUTION

 indicates a hazard which, if not

avoided, 

could

 result in minor or moderate injury. 

 

NOTICE

 

 indicates information considered important but not

hazard-related. 

Hazard Symbols and Meanings

Hazard symbols and meaning for Grass Collectors.

Symbol

Meaning

Safety information about the hazards that can result in

personal injury.

Read the directions for use of the product before operating.

Symbol

Meaning

Keep hands and feet away from deck.

Thrown object hazard

Roll over hazard

Safety Warnings - Grass Catchers

 WARNING 

Failure to read and follow the safety warnings and

instructions in this document and in the rider operator’s

manual could result in death, serious injury, and/or property

damage.
The warnings and instructions must be read, understood,

and obeyed when setting-up, operating, servicing,

transporting, or storing the unit.

 WARNING

• DO NOT operate the unit without either the entire grass

catcher or the deflector in place.

• Turn off the PTO to disengage the blades when not

mowing.

• DO NOT mow in reverse unless absolutely necessary.

Always look down and behind before and while

traveling in reverse.

 WARNING 

Amputation or Laceration Hazard

• If the mower stalls or the catcher system plugs,

disengage the electric clutch (PTO), stop the engine

and remove the key. Set the parking brake. Wait for

moving parts to stop. Remove the foreign object or

clear the chute with a piece of wood before restarting

the engine. Never place hands into blower housing to

remove a jammed object.

• Disengage the electric clutch (PTO). Shut off the

engine, remove the key, and wait for all moving parts to

stop before attaching, adjusting, or disconnecting any

part of the catcher system.

• DO NOT make adjustments or repairs while the engine

is running or blades are moving.

• DO NOT place hands or feet near rotating parts.

Not for 

Reproduction

Summary of Contents for 1697363A-00













Reviews: