17
Operating the Tractor
Figure 3. Engaging the Parking Brake
A. Ground Speed Pedals
B. Brake Pedal
C. Parking Brake Knob
Figure 4. Emptying the Hopper
A. Catcher Dump Pedal
B. Catcher Lever
Parking Brake Function
Applying the Parking Brake
- See Figure 3. To lock the
parking brake, release the ground speed pedals (A), fully
depress the brake pedal (B), pull UP on the parking brake knob
(C), and then release brake pedal.
Releasing the Parking Brake
- See Figure 3. To release the
parking brake, fully depress the brake pedal (B) and push the
parking brake knob (C) DOWN.
A
B
C
A
B
Four Wheel Drive Models (4WD)
1. Disengage the PTO and turn the engine off.
2. Push the transmission release in approximately 2-1/2”
(6.4 cm) to lock into released position (Figure 2.2).
3. The tractor can now be pushed by hand.
Figure 2.2. Transmission Release Lever (4WD)
A. Transmission Release Lever
A
Emptying the Catcher
To empty the catcher:
1. Depress the catcher dump pedal (A, Figure 4).
2. Extend the catcher lever (B) and use it to empty the catcher.
3. Use the lever (B) to close the catcher, and slide it back into
the catcher.
Not
for
Reproduction
