background image

Briggs & Stratton™ Air Tool Warranty Policy

LIMITED WARRANTY

These are our standard warranty terms, but occasionally there may be additional warranty coverage that was not determined at

time of publication. For a listing of current warranty terms for your air tool, go to BRIGGSandSTRATTON.COM

This Limited warranty does not include the following:

A. Parts that are worn or broken or which have become inoperative due to abuse, misuse, accidental damage, neglect or lack of

    proper installation, operation or maintenance (as outlined in the applicable owner’s manual or operating instructions) or product

    that has been used for industrial, professional, commercial or rental purposes;

B. Normal wear and tear or expendable parts or accessories that may be supplied with the product which are expected to become

    inoperative or unusable after a reasonable period of use;

C. Routine maintenance and consumable items such as, but not limited to fuel, lubricants, valves, belts, knobs, nuts, uids,

    tune-ups, or adjustments;

D. Damage caused by repairs made or attempted by persons not authorized by the manufacturer;

E. Product that was sold to the original purchaser as reconditioned or refurbished product (unless otherwise specied in writing);

F. Product or parts thereof if any part from another manufacturer has been installed or any repairs or alterations have been made

    or attempted by unauthorized persons;

G. Normal deterioration of the exterior nish such as, but not limited to, scratches, dents, paint chips, nor any corrosion or

    discoloring by heat, abrasive and chemical cleaners;

H. Component parts sold by and identied as the product of another company, which shall be covered under the other product

    manufacturer's warranty, if any.

For questions about our warranty on this product, contact us at:

Alton Industry LTD. Group

1031 North Raddant Road

Batavia Illinois 60510

888-899-0146

info@altonindustries.com
www.altonindustries.com

January, 2016

Briggs & Stratton™ is a trademark of BRIGGS & STRATTON CORPORATION and is used under license to Alton Industry

Co. Ltd® Alton Industry Co. Ltd warrants this Briggs & Stratton brand product for a period of one year from the date of

original retail purchase against defects in materials and workmanship. Subject to the conditions and limitations described

below, if Alton Industry Co. Ltd determines this product is covered under this warranty, it will be replaced with the same

model or one of equal value or specication, at Alton Industry Co. Ltd's option. Alton Industry Co. Ltd will bear the cost of

replacement. The purchaser must contact Alton Industry Co. Ltd® for all warranty authorizations.

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular

purpose, are limited to one year, or to the extent permitted by law. Liability for incidental or consequential damages are

excluded to the extent exclusion is permitted by law. Some states or countries do not allow limitations on how long an

implied warrant lasts, and some states of countries do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation and exclusion may not apply to you. This warranty gives you specic legal rights and you

may also have other rights which vary from state to state or country to country.

Save your proof of purchase receipt. If you do not provide proof of the initial purchase date at the time warranty service is

requested, the manufacturing date of the product will be used to determine the warranty period. Product registration is not

required to obtain warranty service on Briggs & Stratton products.

Not 

for 

Reproduction

Summary of Contents for 6388-00










Reviews: