10
Assembly
Attach Collector Bags
1. Attach the three collector bags (
AI
, Figure 7) to bag &
cover support (
AH
) using grass bag hangers (
*
) and bag
hanger posts (
**
).
**
AH
*
AI
Figure 7
Bagger Installation WITH Turbo
If using bagger with turbo, refer to Turbo Operator’s
Manual.
Bagger Installation WITHOUT Turbo
If using bagger without turbo, proceed with the
following steps.
Mower Mounting Hardware Installation
For non-turbo use only.
1. On the back side of discharge opening, insert carriage
bolt (
F
, Figure 8) through inside of mower deck and
secure with nut (
L
).
F
L
Figure 8
Frame Hung Mowers
1. Remove existing hardware from outside of the front-
right wheel bracket (
*
, Figure 9).
2. Replace with carriage bolt (
C
), spacer (
U
), washer (
V
)
and secure with nut (
M
) as shown.
V
*
U
M
C
Figure 9
Free Floating Mowers
1. From the inside of deck, near front of discharge opening
assemble carriage bolt (
C
, Figure 10), washer (
T
),
spacer (
U
), washer (
V
) and secure with nut (
M
) as
shown.
C
T
U
V
M
Figure 10
No
t fo
r
Rep
rod
uct
ion
